Wallbox Pulsar Plus 40A Level 2 EV Charger

SAVKAT® is an authorized installer of Wallbox EV Chargers. The Wallbox Pulsar Plus offers the best of both small size and powerful performance for faster electric vehicle charging at home. The Pulsar Plus can charge any electric car* on the market today. Home charging is simple and efficient with the integrated myWallbox app, which lets you control your charger from your smart devices via WiFi or Bluetooth. Onboard intelligence means your smart functions (including scheduled charging and locking/unlocking) are managed in the charger, not the cloud, letting you access and control your charger even when you can’t connect to the Internet. Pulsar Plus also works with Alexa and Google Home voice commands, making charging a seamless addition to your smart home system. NEMA Type 4 rated for watertightness and dust resistance, Pulsar Plus is suitable for indoor and outdoor installation.


  • Connector type: Type 1 (J1772)
  • Maximum current: 40Amps | 9.6kW
  • Color: Matte Black
  • DC Leakage protection Included: No
  • Input voltage: NEMA 14-50 or Hardwired
  • Dimensions: 7.8″x7.9″x3.9″
  • Charger status information: Wallbox App, myWallbox Portal
  • Cable length: 25′
  • Important note: Configurable Current6A to 40A
  • Electrical Safety Certification: UL 2594, UL 2231
  • EMC Compliance: FCC Part 15 Class B
  • Environmental/Enclosure Rating: NEMA Type 4 per UL 50E
  • Rated Voltage: AC +/-10%240/208V (Level 2)
  • Voice Control: Amazon Alexa and Google Assistant

AC Voltage (Nominal): 120/240 V
Feed-In Type: Split Phase
Grid Frequency: 60 Hz
Total Energy: 14 kWh
Usable Energy: 13.5 kWh
Real Power, max continuous: 5 kW (charge and discharge)
Real Power, peak (10 s, off-grid/backup): 7 kW (charge and discharge)
Apparent Power, max continuous: 5.8 kVA (charge and discharge)
Apparent Power, peak (10 s, off-grid/backup): 7.2 kVA (charge and discharge)
Maximum Supply Fault Current: 10 kA
Maximum Output Fault Current: 32 A
Overcurrent Protection Device: 30 A
Imbalance for Split-Phase Loads: 100%
Power Factor Output Range: +/– 1.0 adjustable
Power Factor Range (full-rated power): +/– 0.85
Internal Battery DC Voltage: 50 V
Round Trip Efficiency: 90%
10 years

Dimensions: 1150 mm x 755 mm x 147 mm (45.3 in x 29.6 in x 5.75 in)
Weight: 114 kg (251.3 lbs)
Mounting options: Floor or wall mount

Dimensions and weight differ slightly if manufactured before March 2019. 

Operating Temperature: –20°C to 50°C (–4°F to 122°F)
Recommended Temperature: 0°C to 30°C (32°F to 86°F)
Operating Humidity (RH): Up to 100%, condensing
Storage Conditions: –20°C to 30°C (–4°F to 86°F) | Up to 95% RH, non-condensing | State of Energy (SoE): 25% initial
Maximum Elevation: 3000 m (9843 ft)
Environment: Indoor and outdoor rated
Enclosure Type: NEMA 3R
Ingress Rating: IP67 (Battery & Power Electronics) | IP56 (Wiring Compartment)
Wet Location Rating: Yes
Noise Level: @1m: <40 dBA at 30°C (86°F)

Certifications: UL 1642, UL 1741, UL 1973, UL 9540, IEEE 1547, UN 38.3
Grid Connection: Worldwide Compatibility
Emissions: FCC Part 15 Class B, ICES 003
Environmental: RoHS Directive 2011/65/EU
Seismic: AC156, IEEE 693-2005 (high)

Typical System Layouts